Soluble Machining Fluids

SYNTHETIC FLUID

BIOCOOL 3130

Application

Light to moderate machining and grinding operations on ferrous and hard metals.

Advantages

Formaldehyde free.
Excellent cooling and detergency.
Good separation from tramp oils.
Very good protection against corrosion.
Excellent biostability and stability in use.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Biocool 3130	Clear yellow-green	3 - 6%	0 - 800	3.1

Available packaging

Drum 208 L

SYNTHETIC FLUID

BIOCOOL 3210

📄 Datasheet (PDF)

Application

Light to moderate grinding and machining operations on ferrous metals and titanium. Recommended for low to medium water hardness.

Advantages

Formaldehyde free.
High cooling properties.
Approved by SNECMA on titanium.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Biocool 3210	Clear yellow-green	3 - 8%	0 - 800	2.3

Further technical data

Colour (concentrate)	Yellow
Density	1.069 (ASTM D4052)
pH	9.2 (at 5%, NFT 60.193)
Break point corrosion	3% (IP 287)

Available packaging

Jerrycan 20 L
Drum 200 L
IBC 1000 L

SYNTHETIC FLUID

BIOCOOL 3520

📄 Datasheet (PDF)

Application

Dedicated to carbides and hard steel grinding requiring advanced cooling properties.

Advantages

Formaldehyde and formaldehyde releasers free.
Excellent biostability and stability in use.
Good separation from tramp oils.
Very good particles settling.
Avoid cobalt leaching.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Biocool 3520	Clear yellow-green	3 - 6%	0 - 600	2.3

Further technical data

Colour (concentrate)	Yellow
Aspect	Liquid
Density at 20°C	1.090 (ISO 12185)
Break point corrosion	3% (IP 287)
pH	9.4 (at 5%, NFT 60.193)

Available packaging

Jerrycan 20 L
Drum 208 L

SYNTHETIC FLUID

BIOCOOL 3740

📄 Datasheet (PDF)

Application

All grinding and machining operations on hard metals. Particularly suited to metalworking which requires high pressure (from 50 to 600 bars).

Advantages

Formaldehyde, formaldehyde releasers and boron free.
SNECMA approval on titanium.
Excellent lubrication and cooling properties.
Good separation from tramp oils.
Optimization of surface roughness and finishes.
Excellent biostability and stability in use.

Classifications & approvals

SNECMA approval for titanium machining (document n°455-201-0-00, index B)

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Biocool 3740	Clear yellow-green	3 - 15%	0 - 400	1.6

Further technical data

Colour	Yellow
Density at 20°C	1.079 (ISO 12185)
Break Point Corrosion	2 % (IP 287)
pH (at 5%)	9.1

Available packaging

Drum 208 L

SYNTHETIC FLUID

BIOCOOL 3820

📄 Datasheet (PDF)

Application

Light to moderate grinding and machining operations on ferrous metals and non-ferrous metals. Recommended for low to medium water hardness.

Advantages

Boron free.
Formaldehyde free.
Good lubricity and cooling properties.
Excellent biostability and stability in use.
Good separation from tramp oils.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Biocool 3820	Clear yellow-green	3 - 12%	0 - 800	2.4

Further technical data

Aspect	Limpide (clear)
Density	1.055
pH (at 5%)	9.6
Break Point Corrosion	4 % (IP 287)
Composition characteristics	Free of formaldehydes and formaldehyde releasers, boron, nitrites and DEA; without chlorinated, phosphorous and sulfur additives

Available packaging

Jerrycan 20 L
Drum 200 L

SYNTHETIC FLUID

BIOCOOL 3837 GR

📄 Datasheet (PDF)

Application

Moderate to severe grinding and machining operations on ferrous metals. Recommended for low to medium water hardness.

Advantages

Boron free.
Formaldehyde free.
Excellent air release properties.
Very good lubricity and cooling properties.
Improvement of tool life.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Biocool 3837 GR	Clear yellow-green	5 - 12%	0 - 400	1.3

Further technical data

Colour	Yellow
Density	1.083 (ASTM D4052)
pH (at 5%)	9.8
Break Point Corrosion	3 % (IP 287)
Storage temperature	5°C to 40°C
Product type	Mineral oil free, water soluble synthetic metalworking fluid concentrate
Composition characteristics	Boron-free, formaldehyde releaser-free, nitrites-free, DEA-free, chlorinated additives-free

Available packaging

Drum 202 L

SEMI-SYNTHETIC FLUID

SAFKOOL 6110 CS

📄 Datasheet (PDF)

Application

Light to moderate grinding and machining on ferrous metals. Recommended for low to medium water hardness.

Advantages

Formaldehyde free.
High cooling properties.
Low consumption.
Very good biostability.
Cleanliness of machines and parts.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool 6110 CS	Translucent	5 - 8%	100 - 400	2.5

Further technical data

Colour	Light yellow
Density at 20°C	1.027 (ISO 12185)
Break Point Corrosion	< 3 % (IP 287)
pH (at 5%)	9.7
Composition characteristics	Free of formaldehydes and formaldehyde releasers, boric acid, nitrites and DEA; without chlorinated additives

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

SEMI-SYNTHETIC FLUID

SAFKOOL 6210

📄 Datasheet (PDF)

Application

Light to moderate grinding and machining on ferrous metals. Can also be used for standard machining operations on yellow metals in certain conditions.

Advantages

Formaldehyde free.
Excellent cooling properties.
Excellent biostability and stability in use.
Operator friendly.
Cleanliness of working environment.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool 6210	Translucent	4 - 8%	200 - 500	1.7

Further technical data

Aspect	Liquid
pH (at 5%)	9.3
Break Point Corrosion	2 % (IP 287)

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

SEMI-SYNTHETIC FLUID

SAFKOOL 6220

📄 Datasheet (PDF)

Application

Light to moderate machining operations on ferrous and non-ferrous metals. Recommended for medium to very high-water hardness.

Advantages

Formaldehyde and bactericide free.
Excellent stability in hard waters.
Cleanliness of machines and parts.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool 6220	Translucent	5 - 15%	200 - 800	1.6

Further technical data

Colour	Brown
Density at 20°C	1.025 (ISO 12185)
Break Point Corrosion	2 % (IP 287)
pH (at 5%)	9.6
Composition characteristics	Free of formaldehydes and formaldehyde releasers, nitrites, glycol and DEA; without chlorinated or sulfur additives

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

SEMI-SYNTHETIC FLUID

SAFKOOL 6420

📄 Datasheet (PDF)

Application

Moderate to severe machining and grinding operations on all metals, including aerospace alloys. Recommended for soft to medium water hardness. Suitable for high pressure jet (up to 70 bars).

Advantages

Formaldehyde free.
Good release of tramp oils.
Approved by SNECMA on aluminum and titanium.
Product free of safety labelling.
Reduction of tools wear and improvement of surface roughness.

Classifications & approvals

SNECMA approval for aluminium, titanium and nickel machining (document n°455-201-0-00, index B)

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool 6420	Translucent	5 - 12%	50 - 800	1.65

Further technical data

Colour	Yellow
Density at 20°C	1.025 (ISO 12185)
Break Point Corrosion	2 % (IP 287)
pH (at 5%)	9.6
Maximum operating pressure	70 bar
Composition characteristics	Free of formaldehydes, nitrites, glycol ether and DEA; without chlorinated or sulfur additives

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

SEMI-SYNTHETIC FLUID

SAFKOOL 6620

📄 Datasheet (PDF)

Application

For severe operations like broaching, boring, tapping and some forming applications on ferrous, high alloyed and stainless steels.

Advantages

Formaldehyde free.
Excellent cooling and Extreme-Pressure properties.
Optimization of surface finish.
Excellent biostability and stability in use.
Operator friendly.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool 6620	Translucent	4 - 20%	200 - 500	1.6

Further technical data

Colour	Orange
Density	1.031 (ASTM D4052)
pH (at 5%)	9.5
Break Point Corrosion	3 % (IP 287)
Storage temperature	5°C to 40°C
Composition characteristics	Formaldehydes and formaldehyde releasers free; nitrites, glycol ether and DEA free; without chlorinated additives

Available packaging

Jerrycan 20 L
Drum 200 L

SEMI-SYNTHETIC FLUID

SAFKOOL 6817 GR

📄 Datasheet (PDF)

Application

Light to moderate machining and grinding operations on ferrous and non-ferrous metals.

Advantages

Formaldehyde and boron free.
Very good cooling and detergency properties.
Very good particles settling properties.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool 6817 GR	Translucent	5 - 8%	100 - 500	1.5

Further technical data

Colour	Yellow
Density	0.994 (ASTM D4052)
pH (at 5%)	9.9
Break Point Corrosion	2.5 % (IP 287)
Composition characteristics	Free of formaldehydes and formaldehyde releasers, boron, nitrites and DEA; without chlorinated additives

Available packaging

Drum 200 L

SEMI-SYNTHETIC FLUID

SAFKOOL 6820 SW

📄 Datasheet (PDF)

Application

Machining of ferrous and non-ferrous alloys, including standard aluminum alloys. Suitable for dilution in soft water and uses under high pressure.

Advantages

Boron, bactericide, formaldehyde & formaldehyde releasers free.
Excellent lubricating & cooling properties.
Excellent non-foaming properties.
High pressure compatible.
Optimization of surface finish and endurance.
Excellent biostability and stability in use.

Classifications & approvals

SAFRAN Pr-6300 (for aluminium, Inconel, titanium machining)

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool 6820 SW	Translucent	4 - 15%	100 - 500	1.5

Further technical data

Colour	Light brown
Density	1.014 (ASTM D4052)
pH (at 5%)	9.9
Break Point Corrosion	3.5 % (IP 287)
Storage temperature	5°C to 40°C
Product type	Boron free, water soluble semi-synthetic metalworking fluid concentrate
Composition characteristics	Boron, bactericide, formaldehydes and formaldehyde releasers free; nitrites, glycol ether and DEA free, without chlorinated or sulfur additives

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

SEMI-SYNTHETIC FLUID

SAFKOOL TMC

📄 Datasheet (PDF)

Application

Water emulsifying metalworking fluid concentrate dedicated to steel ERW tube manufacturing operations (including galvanized steels).

Advantages

Boron, formaldehyde & formaldehyde releasers free.
Excellent cooling & detergent properties.
Good separation from tramp oils.
Very good protection against corrosion.
Excellent biostability and stability in use.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safkool TMC	Translucent	5 - 7%	5 - 500	1.4

Further technical data

Aspect	Limpide (clear)
pH (at 5%)	9.8
Break Point Corrosion	2 % (IP 287)
Composition characteristics	Formaldehyde and formaldehyde releasers free, boron free, nitrites free, DEA free, chlorinated additives free
Recommended application (ERW tube manufacturing)	5-7 %

Available packaging

Drum 208 L
IBC 1000 L

EMULSION

STABILIS 9120

📄 Datasheet (PDF)

Application

Water soluble metalworking fluid concentrate dedicated for general machining of copper alloys, cast iron, steel and standard aluminum alloys.

Advantages

Excellent lubricating and cooling properties.
Low foaming product.
Excellent biostability in use.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Stabilis 9120	Milky white	4 - 10%	200 - 600	0.88

Further technical data

Appearance	Orange
Density	0.935 (ASTM D4052)
pH (at 5%)	9.8
Break Point Corrosion	4.5 % (IP 287)
Storage temperature	5°C to 40°C
Composition characteristics	Formaldehydes and formaldehyde releasers free, without boron and DEA; glycol ether and nitrites free, without chlorinated and phosphorous additives

Available packaging

Jerrycan 20 L
Drum 208 L

EMULSION

STABILIS 9220

📄 Datasheet (PDF)

Application

Light to moderate machining operations on ferrous and non-ferrous metals. Suitable for medium to high hardness water.

Advantages

Formaldehyde free.
Good compromise between lubricating and cooling properties.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Stabilis 9220	White opalescent	5 - 8%	100 - 600	1.2

Further technical data

Colour	Yellow
Density	0.996 (ASTM D4052)
pH (at 5%)	9.0
Break Point Corrosion	1 % (IP 287)
Storage temperature	5°C to 40°C
Composition characteristics	Bactericide, formaldehydes and formaldehyde releasers free; nitrites, DEA and glycol ether free, without chlorinated and phosphorous additives

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

EMULSION

STABILIS 9230

📄 Datasheet (PDF)

Application

Medium to severe machining operations on ferrous and non-ferrous metals, including all aerospace alloys. High pressure compatible (up to 70 bars).

Advantages

Formaldehyde free.
High lubrication performance.
Optimization of surface roughness and finishes.
Approved by SNECMA on aluminum and titanium.

Classifications & approvals

SAFRAN Pr-6300 (for aluminium, TiAl, titanium machining)
BOEING BAC 5008 (for aluminium, steel, titanium)

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Stabilis 9230	White opalescent	5 - 15%	200 - 500	1.0

Further technical data

Colour	Yellow
Density	0.980 (ASTM D4052)
pH (at 5%)	9.2
Break Point Corrosion	2 % (IP 287)
Maximum operating pressure	70 bar
Storage temperature	5°C to 40°C
Composition characteristics	Boron-free emulsion; bactericide, isothiazolinone, formaldehydes and formaldehyde releasers free; nitrites, MIPA and DEA free; chlorinated and phosphorous additives free

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

EMULSION

STABILIS 9837 AL

📄 Datasheet (PDF)

Application

Heavy duty machining on aluminum (cast & automotive) and steel alloys. Suitable for both soft and hard water.

Advantages

Formaldehyde and boron free.
Good cooling and detergency properties.
Very good lubricity.
Good emulsion stability, even in hard waters.
Excellent biostability.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Stabilis 9837 AL	Milky white	10%	100 - 800	1.0

Further technical data

Colour	Light brown
Density	0.953 (ASTM D4052)
pH (at 5%)	9.9
Break Point Corrosion	3 % (IP 287)
Storage temperature	5°C to 40°C
Composition characteristics	Boron free; formaldehyde and formaldehyde releasers free; nitrites free; DEA free; chlorinated additives free

Available packaging

Drum 200 L

EMULSION

STABILIS 9910 AL

📄 Datasheet (PDF)

Application

Water soluble concentrate particularly suited to all machining processes on steels, aluminum and its alloys. Particularly effective for all machining operations on ferrous and non-ferrous alloys on both soft and hard water.

Advantages

Formaldehyde and boron free.
Good cooling and detergent properties.
Excellent biostability and stability in use.

Classifications & approvals

SAFRAN Pr-6300 specification compliance (for titanium component machining)

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Stabilis 9910 AL	Milky white	5 - 15%	100 - 600	0.97

Further technical data

Colour	Brown
Density	0.959 (ASTM D4052)
pH (at 5%)	9.0
Break Point Corrosion	4 % (IP 287)
Storage temperature	5°C to 40°C
Composition characteristics	Boron free, amine free (secondary amines); formaldehyde and formaldehyde releasers free; boric acid free; nitrites free; DEA free; chlorinated additives free

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

EMULSION

STABILIS 9920 AL

📄 Datasheet (PDF)

Application

All machining processes on aluminum and its alloys. All machining operations on ferrous and non-ferrous alloys on both soft and hard water.

Advantages

Boron, formaldehyde and formaldehyde releaser free.
Very good cooling and detergency properties.
Good lubrication properties.
Excellent stability in use.
Excellent biostability.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Stabilis 9920 AL	Milky white	4 - 15%	100 - 600	0.98

Further technical data

Colour	Orange
Aspect	Clear
pH (at 5%)	9.4
Break Point Corrosion	2.5 % (IP 287)
Composition characteristics	Boron free; formaldehyde and formaldehyde releasers free; boric acid, nitrites and DEA free; chlorinated additives free; glycol ether free; bactericide free; sulfur additive free; phosphor additive free

Available packaging

Jerrycan 20 L
Drum 208 L
IBC 1000 L

EMULSION

SAFCOLITH GR 2 NS

Application

Soluble concentrate which facilitates granite cutting and increases the life of diamond tools. It can be used for cutting of granite blocks on cutting machines or multi-disks machines.

Advantages

Formaldehyde & boron free.
Can be used on a wide range of granite.
Excellent lubricating power for stone cutting.
Increased diamond tools life.
No gumming.

Product name	Appearance in dilution	Concentration of use (depends on the application and the materials)	Water hardness (ppm)	Refractometer factor
Safcolith GR 2 NS	Milky white	1.5 - 2.5%	100 - 300	1.1

Available packaging

Drum 170 kg
IBC 1000 L